3Com 3C16753 User Guide - Page 14
Ethernet 10Mbps Configuration Rules
View all 3Com 3C16753 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3Com recommends that the cable (B) between the Fast Ethernet hubs is no longer than 5m (16.4ft). This allows the maximum hub-to-workstation cable length (A or C) of 100m (328ft). Figure 3 Configuration Rules and Example of a Fast Ethernet (100Mbps) Network Ethernet (10Mbps) Configuration Rules You can connect a maximum of four Ethernet (10Mbps) hubs in series between workstations, or between a workstation and a non-repeater piece of equipment (such as a switch). Each cable must not exceed 100m (328ft). An example is shown in Figure 4. Figure 4 Example of an Ethernet (10Mbps) Network 14
14
3Com recommends that the cable (B) between the Fast
Ethernet hubs is no longer than 5m (16.4ft). This allows the
maximum hub-to-workstation cable length (A or C) of 100m
(328ft).
Figure 3
Configuration Rules and Example of a Fast Ethernet
(100Mbps) Network
Ethernet (10Mbps) Configuration Rules
You can connect a maximum of four Ethernet (10Mbps)
hubs in series between workstations, or between a
workstation and a non-repeater piece of equipment (such as
a switch). Each cable must not exceed 100m (328ft). An
example is shown in Figure 4.
Figure 4
Example of an Ethernet (10Mbps) Network