3Com 3CB9E7 Getting Started Guide - Page 56
Where to Go from Here, Management Engine User Guide
View all 3Com 3CB9E7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
56 CHAPTER 5: START THE SWITCH If you power on a power supply and it is not operating, the Character Display displays the following: PWR x. Where x is the number of the power supply that is not operating. The installed switch fabric module Status LED flashes green. When the power-on phase has completed successfully, normal operation begins and switch fabric module Status LEDs stop flashing and remain a steady green. If one of the power-on diagnostic tests fails, then the switch fabric module Status LED turns a steady yellow. The Switch displays the following message when the management module is installed properly and the RS-232 connection is made: CoreBuilder 9000 Enterprise Management Engine (vx.xx) Copyright (c) 1999 3Com Corporation. Login: To continue operating and configuring your Switch, see the CoreBuilder 9000 Enterprise Management Engine User Guide. Where to Go from Here To verify that the CoreBuilder 9000 chassis and all modules have been installed correctly, examine the LED status on each module. To obtain information about a module's LEDs and status indicators, see the User Guide, Getting Started Guide, or Quick Start Guide for that module. Table 9 indicates what to do after you power on the Switch. For detailed information about the tasks that are listed in Table 9, see the Enterprise Management Engine Quick Start Guide for the CoreBuilder 9000 Enterprise Switch or the CoreBuilder 9000 Enterprise Management Engine User Guide.