3Com 3CR17251-91 Getting Started Guide - Page 52

52 CHAPTER 3: SETTING UP FOR MANAGEMENT Setting Up Overview This section gives an overview of what you need to do to get your Switch set up and ready for management when it is in its default state. The whole setup process is summarized in Figure 21. Detailed procedural steps are contained in the sections that follow. In brief, you need to: ■ Configure IP information manually for your Switch or view the automatically configured IP information ■ Prepare for your chosen method of management Figure 21 Initial Switch Setup and Management Flow diagram Power Up the Switch. Plug and Play Setup Initial IP Information Setup IP Information is automatically configured via DHCP See page 53 Do you want to manually Yes configure the IP information? No How do you want to connect to the Switch? How do you want to view the automatically configured IP information? Connect to the console port and use the Command Line Inter- face. See page 55 Connect to a front panel port and use the Web Interface or Command Line Interface. See page 55 Use 3Com Network Director (3ND). See page 62 Connect to the console port and use the Command Line Interface. See page 62 Feature Management How do you want to manage your Switch? See page 50 Command Line Interface SNMP See page 67 Connect via the console port. See page 64 Connect over the network via Telnet. See page 64 Web Interface Connect over the network. See page 67