3Com S7906E Command Reference - Page 1760

Parameters idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled. service-type: Specifies the local users of a type. z ftp refers to users using FTP; z lan-access refers to users accessing the network through an Ethernet, such as 802.1X users; z ssh refers to users using SSH; z telnet refers to users using Telnet; z terminal refers to users logging in through the console port, AUX port. state { active | block }: Specifies all local users in the state of active or block. A local user in the state of active can access network services, while a local user in the state of blocked cannot. user-name user-name: Specifies all local users using the specified username. The username is a case-sensitive string of 1 to 55 characters and does not contain the domain name. vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094. slot slot-number: Specifies all local users in the slot where the interface card is inserted. Description Use the display local-user command to display information about specified or all local users. Related commands: local-user. Examples # Display the information of local user bbb on the card installed on slot 1. display local-user user-name bbb slot 0 Slot: 0 The contents of local user bbb: State: Active ServiceType: lan-access Idle-cut: Disable Access-limit: Enable Current AccessNum: 100 Bind location: Disable Vlan ID: Disable IP address: Disable MAC address: Disable FTP Directory: flash: User Privilege: 0 Total 1 local user(s) matched. Table 1-3 display local-user command output description (for distributed device) Slot State ServiceType Idle-cut Access-limit Field Description Slot number of the card Status of the local user, active or block Service types that the user can use, including ftp, lan-access, ssh, telnet, and terminal. Whether idle cut is enabled Access user connection limit 1-19