3M 78-9236-6824-4 Operation Guide - Page 35

Multifunctional Settings (continued) NETWORK Menu This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it. memo The following settings is not required If your network can assign an IP address through its DHCP server. The projector is set to DHCP by default. Please see the section "Network Setting Up". MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT SETUP DHCP INFORMATION RESET TURN OFF Item SETUP Description Pressing the (or the ENTER) button, displays the NETWORK - SETUP IP ADDRESS menu to the right. IP ADRRESS 192 . 168 . 1 . 24 memo This menu will be shown only when the DHCP ESC :RETURN ENT :NEXT is disabled at the NETWORK menu. The IP Address is identification number of the projector on the Network. 1. Set the IP Address using the / buttons. memo The same IP Address cannot be used for two devices. Pressing the (or the ENTER) button at the IP NETWORK - SETUP ADDRESS menu, displays the SUBNET MASK menu. SUBNET MASK The SUBNET MASK is an address of the Network. 255 . 255 . 255 . 1 ESC :RETURN ENT :NEXT 2. Set the address of the Network to be used. Pressing the (or the ENTER) button at the SUBNET MASK, shows the DEFAULT GATEWAY menu. The DEFAULT GATEWAY is the main device to access outside of the Network. NETWORK - SETUP DEFAULT GATEWAY 255 . 255 . 255 . 0 ESC :RETURN ENT :NEXT 3. Set the address of the device as gateway to an outer Network. DHCP Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF If your Network doesn't support the DHCP function, select the TURN OFF. NETWORK DHCP TURN ON TURN OFF INFORMATION Pressing the (or the ENTER) button displays the INFORMATION menu. The menu shows the information about the current Network setting as illustrated right. NETWORK-INFORMATION IP ADRRESS 192. 168. 1. 24 SUBNETMASK 255. 255. 255. 0 DEFAULT GATEWAY 255. 255. 255. 0 MAC ADRRESS 00. E0. 47. 03. 0C. D8 RESET Select the EXECUTE using the button to reset the NETWORK menu items. : EXECUTE CANCEL All items on the NETWORK menu are returned to the initial setting. © 3M 2004 3M™ Digital Projector X70/X80 35