3M DX70I Operation Guide - Page 15

3M™ Digital Projector DX70i Installation Powering Off the Projector 1. Press the "Power/Standby" button to turn off the projector lamp; you will see a message displayed on the projector's screen. Press the "Power/ 6WDQGE\´EXWWRQDJDLQWRFRQ¿UP 2. The cooling fans continue to operate for about 2 minutes for FRROLQJF\FOHDQGWKH3RZHU/('ZLOOÀDVKUHG:KHQWKH 3RZHU/('VWRSVÀDVKLQJWKHSURMHFWRUKDVHQWHUHGVWDQGE\ mode. Once in standby mode, simply press "Power/Standby" button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure. LED Indicator ™ When the "TEMP" indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. ™ When the "LAMP" indicator turns red, it indicates a problem with the lamp. Turn off the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. ™ :KHQWKH³/$03´LQGLFDWRUÀDVKHVUHGLWLQGLFDWHVWKH fan has failed. Stop using the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. © 3M 2008. All Rights Reserved. 13