3M S20 Operation Guide - Page 26

Multifunctional Settings (continued) PICTURE - 2 Menu With the PICTURE - 2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN V POSITION 20 PICTURE-1 H POSITION 142 PICTURE-2 H PHASE 31 INPUT AUTO H SIZE 1344 OVER SCAN 95 SCREEN OPTION RESET : SELECT Item V POSITION Description Adjust the Vertical Position: Up ˱ Down • This item can be selected only at a RGB input. H POSITION H PHASE H SIZE OVER SCAN RESET Adjust the Horizontal Position: Left ˱ Right • This item can be selected only at a RGB input. Adjust the Horizontal Phase (to eliminate flicker) : Right ˱ Left • This item can be selected only at a RGB input or a COMPONENT VIDEO input. Adjust the Horizontal Size: Large ˱ Small • When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please press the RESET button during selection of this item to reset the H SIZE. • This item can be selected only at a RGB input. Adjust the Over-scan Ratio: Large ˱ Small • This item can be selected only at a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input. • When this adjustment is too large, a certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Reset the PICTURE-2 Menu Items: Selecting the EXECUTE performs this function. ˰ EXECUTE CANCEL • The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the H PHASE item is not reset. 26