3M X15 Operation Guide - Page 25

Multifunctional settings EASY MENU With the EASY MENU, items shown in the table below can be performed. Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT ZOOM KEYSTONE MODE BRIGHT CONTRAST COLOR TINT SHRPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE 4:3 +0 +0 NORMAL +0 +0 +0 +0 +3 NORMAL NORMAL 0 ENGLISH Go To Advance Menu... Item ASPECT ZOOM KEYSTONE MODE BRIGHT CONTRAST COLOR TINT Description Using the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu. (30, 19) Using the buttons ◄/► adjusts the zoom. See the item ZOOM of section SETUP menu. (34, 19) Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (34, 20) Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA (27) and a mode of COLOR TEMP (28). Choose a suitable mode according to the projected source. NORMAL  CINEMA  DYNAMIC NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT) CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) • When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is "CUSTOM". Using the buttons ◄/► adjusts the brightness. See the item BRIGHT of section PICTURE menu. (27) Using the buttons ◄/► adjusts the contrast. See the item CONTRAST of section PICTURE menu. (27) Using the buttons ◄/► adjusts the strength of whole color. See the item COLOR of section PICTURE menu. (28) • This item can be chosen only at a video signal. Using the buttons ◄/► adjusts the tint. See the item TINT of section PICTURE menu. (28) • This item can be chosen only at a video signal. 25