AEG AGN58210F0 Product Manual - Page 15
Refer to Fast Freeze func
View all AEG AGN58210F0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
WHAT TO DO IF... ENGLISH 15 WARNING! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual. There are some sounds during normal use (compressor, refrigerant circulation). Problem Possible cause Solution The appliance does not operate. The Pilot light does not flash. The appliance is switched Switch on the appliance. off. The mains plug is not con- Connect the mains plug to nected to the mains sock- the mains socket correctly. et correctly. The appliance has no power. There is no voltage in the mains socket. Connect a different electrical appliance to the mains socket. Contact a qualified electrician. The Pilot light flash- The appliance is not work- Contact a qualified electri- es. ing properly. cian. The Alarm light flash- The temperature in the es. freezer is too high. Refer to "Excessive Temperature Alarm" The acoustic alarm sounds The temperature in the freezer is too high. Refer to "Excessive Temperature Alarm" The door is left open. Close the door. The compressor op- The temperature is not set Set a higher temperature. erates continually. correctly. The door is not closed cor- Refer to "Closing the rectly. door". The door has been opened too frequently. Do not keep the door open longer than necessary. The product temperature Let the product tempera- is too high. ture decrease to room tem- perature before storage. The room temperature is Decrease the room temper- too high. ature. The Fast Freeze function is Refer to "Fast Freeze func- switched on. tion". The temperature in the freezer is too low. The temperature regulator Set a higher temperature. is not set correctly.