AEG AGN71800F0 Product Manual - Page 13

What to do if... 13 Problem The appliance does not operate. The Pilot light does not flash. The Pilot light flashes. The Alarm light flashes. The compressor operates continually. The temperature in the freezer is too low. The temperature in the freezer is too high. Possible cause The appliance is switched off. Solution Switch on the appliance. The mains plug is not connected Connect the mains plug to the to the mains socket correctly. mains socket correctly. The appliance has no power. Connect a different electrical ap- There is no voltage in the mains pliance to the mains socket. socket. Contact a qualified electrician. The appliance is not working properly. Contact a qualified electrician. The temperature in the freezer is Refer to "High temperature too high. alarm" The temperature is not set cor- Set a higher temperature. rectly. The door is not closed correctly. Refer to "Closing the door". The door has been opened too Do not keep the door open longer frequently. than necessary. The product temperature is too high. Let the product temperature decrease to room temperature before storage. The room temperature is too high. Decrease the room temperature. The FROSTMATIC function is switched on. Refer to "FROSTMATIC function". The temperature regulator is not Set a higher temperature. set correctly. The FROSTMATIC function is switched on. Refer to "FROSTMATIC function". The temperature regulator is not Set a lower temperature. set correctly. The door is not closed correctly. Refer to "Closing the door". The product temperature is too high. Let the product temperature decrease to room temperature before storage. Many products are stored at the Store less products at the same same time. time. Products are too near to each other. Store products so that there is cold air circulation. Closing the door 1. Clean the door gaskets.