AEG CX8-2-80DB User Manual - Page 5

ENGLISH Thank you for choosing an AEG CX8 vacuum cleaner. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your vacuum cleaner. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. DESCRIPTION OF CX8 roll and turn o the nozzle front lights. The vacuum cleaner can still be used, even when the BRUSHROLLCLEAN® function is deactivated. To DE reactivate the BRUSHROLLCLEAN® function, place CX8 on charge and charge for 15 minutes. Please note that the BRUSHROLLCLEAN® function might not be able to GB remove thicker threads or wires that are caught in the brush roll. EL EMPTYING OF THE DUST CONTAINER A. ON/OFF button B. Power regulation button K. Cable protector grill L. Hatch cover for brush roll 9 Remove the dust container by pressing the button. 10 Take out the lters from the dust container by pressing the release but- ES C. Locking screw M. Brush roll tons. Empty the contents into a dustbin. Never wash the dust container D. Charging station, wall unit (* N. BRUSHROLLCLEAN® pedal or lters in a dishwasher. FR E. Charging station, oor unit (* O. Nozzle front lights F. Charging adapter G. Fine lter (inner lter) H. Pre lter (outer lter) I. Release button, dust container J. Dust container P. Charging indicator Q. Cli hanger R. Wall holder *) S. Charging connector*) (* Not available on models CX8-2-75xxx *) Only on models CX8-2-75xxx. IMPORTANT FILTER CLEANING! 11 The lters must be cleaned at regular intervals to ensure a high clean- IT ing performance. Take out the lters by pressing the release buttons. Separate the inner lter from the outer lter. NL 12 Rinse the lter parts carefully under lukewarm water without using any detergents. (Never use the dishwasher or washing machine.) Shake to remove excess water and leave to dry minimum 12h before putting PT them back into the cleaner. BEFORE STARTING Check that the package includes all parts described in this instruction CLEANING THE HOSE AND NOZZLE WHEELS AR manual and read this manual carefully. Pay special attention to the 13 Loosen the hose behind the nozzle from its upper connection. Remove safety precautions chapter. Save these instructions. any object or debris that can be blocking the air ow in the hose or in FA the air channel to the dust cup, and put the hose back. 1 Assemble the handle. For model CX8-2-75xxx, use the wall holder *): 2 A) Make sure that CX8 is on a stable and horizontal surface away from 14 If the wheels need to be cleaned or get jammed, remove them carefully by using a at screwdriver. heat sources, direct sunlight or wet places. Attach the wall holder to the wall 104 cm above the oor with a suitable screw and wall plug. Make sure to use a correct wall plug for the wall. B) Attach the handle to the wall holder. REMOVING AND CLEANING THE BRUSH ROLL 15 If the brushroll gets blocked CX8 will stop. Open the cable protector grill and the brush roll hatch cover and remove the brush roll. C) Connect the charging cable to the back side of the vacuum cleaner. 16 Use a pair of scissors to remove threads etc. Reassemble the brush roll, For all other models: making sure it can spin freely. 3 Assemble the charging stand. 4 A) Connect the charging cable to the charge stand. REMOVING THE BATTERIES FOR RECYCLING B) There is a hollow space in the bottom of the charging station where Warning; Battery removal must only be done by an AEG service unused cable can be wound. center or o cial collection point! C) Position the charging station on a stable and horizontal surface away 17 Only remove batteries if the product is to be scrapped. Improper han- from heat sources, direct sunlight or wet places. dling of the batteries may be hazardous. Batteries should always be 5 Insert the adaptor into the mains and charge CX8. The charging indicator will be lit when CX8 is on charge. completely discharged before removal. Take your product to an AEG service center or o cial collection point for recycling. They can remove and recycle the battery and electric parts in a safe and professional CHARGING CX8 6 When fully charged, the charging indicator will blink slowly. The way. Follow your country's rules for collection of rechargeable batteries and electrical products. numbers of LED lamps will indicate the level of charge. Full charging time is around 5 hours. For better battery performance, charge CX8 for 24 hours before rst use and always keep it on charge when not used. Enjoy a great cleaning experience with CX8! VACUUMING WITH CX8 Before vacuuming, check that the nozzle wheels and the brush roll are clean from sharp objects in order to avoid scratching sensitive oors and to ensure full cleaning performance. 7 Start and stop CX8 by pushing the ON/OFF button. CX8 has 3 power settings which is regulated with the power regulation button. CX8 will start on the "High power mode". For more silent cleaning and longest run time, press the power regulation button to activate the "Long runtime mode". Press the power regulation button one more time to activate the "Normal cleaning mode". BRUSHROLLCLEAN® FUNCTION Use the BRUSHROLLCLEAN® function to keep the brush roll clean and free from hair and bres. For best results use the BRUSHROLLCLEAN® function when CX8 is fully charged. 8 Place CX8 on a hard and at surface. Do not use the BRUSHROLLCLEAN® function on carpets. Press the BRUSHROLLCLEAN® pedal with your foot while the cleaner is on. Hold for 5 seconds until hairs and bres are removed. There will be a cutting noise during this process, this is normal. If hairs remain on the brush roll, repeat the process. The BRUSHROLLCLEAN® function is equipped with an overheating protection. If the BRUSHROLLCLEAN® function has been used for more than 30 seconds (constant or interrupted) it will deactivate the brush AEG reserves the right to change products, information and speci cations without notice. www.aeg.com 7