AEG FSE73507P User Manual - Page 15

Before First Use

Get AEG FSE73507P PDF manuals and user guides View all AEG FSE73507P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

is then selected automatically after you activate the appliance. When the latest programme selection is disabled, the default programme is ECO. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically. 8.1 The salt container CAUTION! Use only regeneration salt for dishwashers. Do not use kitchen salt. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. 6. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. To prevent corrosion, fill the salt container and then immediately start a complete dishwashing cycle with detergent. 8.2 How to fill the rinse aid dispenser How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3. Fill the salt container with 1 kg of salt (until it is full). B C A CAUTION! The compartment (C) is for rinse aid only. Do not fill it with detergent. ENGLISH 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
is then selected automatically after you
activate the appliance.
When the latest programme selection is
disabled, the default programme is ECO.
8.
BEFORE FIRST USE
1.
Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2.
Fill the salt container.
3.
Fill the rinse aid dispenser.
4.
Open the water tap.
5.
Start the programme Quick to remove
any residuals from the manufacturing
process. Do not use detergent and do not
put dishes in the baskets.
After starting the programme, the appliance
recharges the resin in the water softener for
up to 5 minutes. The washing phase starts
only after this procedure is complete. The
procedure is repeated periodically.
8.1 The salt container
CAUTION!
Use only regeneration salt for
dishwashers. Do not use kitchen salt.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
How to fill the salt container
1.
Turn the cap of the salt container
counterclockwise and remove it.
2.
Put 1 litre of water in the salt container
(only for the first time).
3.
Fill the salt container with 1 kg of salt
(until it is full).
4.
Carefully shake the funnel by its handle to
get the last granules inside.
5.
Remove the salt around the opening of
the salt container.
6.
Turn the cap clockwise to close the salt
container.
CAUTION!
Water and salt can come out of the salt
container when you fill it. To prevent
corrosion, fill the salt container and then
immediately start a complete
dishwashing cycle with detergent.
8.2 How to fill the rinse aid
dispenser
B
C
A
CAUTION!
The compartment (
C
) is for rinse aid only.
Do not fill it with detergent.
ENGLISH
15