AEG KM4000 Product Manual - Page 24
Getting started, Other functions
View all AEG KM4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting started gb 7. Work light and Power indicator light: If the appliance is plugged 8. Note: If the Speed selector is already turned on before the in and a speed is selected, a blue appliance is plugged in, both the LED lights up around the Speed blue Speed selector LED light and selector. A work light will also light the Work light will flash OFF and ON up over the working area. If the to let you know the Speed selector Speed selector is moved to "OFF", has been left on. Turn the Speed the working light will automatically selector to OFF and the lights shut off after 3 min. will stop flashing. Then resume operating normally. Other functions 1. Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow the instructions that comes with each attachment for correct and safe use. 2. Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly. See 3 for further instructions. 3. Turn the Speed selector to "OFF" and unplug the appliance. Tilt the Motor head back. Use a slotted point Head screwdriver to adjust the screw. Turn counter clockwise to raise the Attachment shaft, turn clockwise to lower it. 24