AEG L6047FL Product Manual - Page 14

Check the position of the flap, Setting and starting the, programme

Page 14 highlights

14 www.aeg.com Check the position of the flap 1. Pull out the detergent dispenser until it stops. 2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: - Do not use gelatinous or thick liquid detergents. - Do not put more liquid detergent than the limit showed in the flap. - Do not set the prewash phase. - Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 9.3 Setting and starting the programme 1. Turn the programme knob. 2. The indicator of button 4 flashes with red colour. 3. The indicators of the default temper- ature and spin speed come on. To change the temperature and/or the spin speed, press the related buttons. 4. Set the available functions and the delay start. When you press the relevant button, the indicator of the set function comes on or the display shows the related symbol.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Check the position of the flap
1.
Pull out the detergent dispenser un-
til it stops.
2.
Press the lever down to remove the
dispenser.
3.
To use powder detergent, turn the
flap up.
4.
To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
Do not use gelatinous or thick
liquid detergents.
Do not put more liquid deter-
gent than the limit showed in
the flap.
Do not set the prewash phase.
Do not set the delay start func-
tion.
5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
9.3
Setting and starting the
programme
1.
Turn the programme knob.
2.
The indicator of button
4
flashes
with red colour.
3.
The indicators of the default temper-
ature and spin speed come on. To
change the temperature and/or the
spin speed, press the related but-
tons.
4.
Set the available functions and the
delay start. When you press the rele-
vant button, the indicator of the set
function comes on or the display
shows the related symbol.
14
www.aeg.com