AEG S73400CTW1 Product Manual - Page 16
Replacing The Control, Closing The Door
View all AEG S73400CTW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 www.aeg.com Problem Possible cause Solution Water flows on the ground. The melting water outlet does not flow in the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. The temperature in the appliance is too low/high. The temperature regulator Set a higher/lower temper- is not set correctly. ature. If your appliance is still not working properly after making the above checks, contact the After Sales Centre. You can find the list at the end of this manual. REPLACING THE CONTROL UNIT The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the control unit. Contact your Service Center. CLOSING THE DOOR 1. Clean the door gaskets. 2. If necessary, replace the defective door gaskets. Contact the After Sales Service.