AEG S83200CMM0 Product Manual - Page 22
Location, Electrical connection
View all AEG S83200CMM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 Installation Climate class SN N ST T +10°C to + 32°C +16°C to + 32°C +16°C to + 38°C +16°C to + 43°C Ambient temperature Location The appliance should be installed well away from 100 mm min sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the A B appliance should not be positioned below over- hanging wall units. Accurate levelling is ensured 20 mm by one or more adjustable feet at the base of the cabinet. WARNING! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation. Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E.E.C. Directives.