AEG T6DBG720N User Manual - Page 16

16 www.aeg.com 2. Pull the plastic connection out and drain the water into a basin or equivalent receptacle. 4. If necessary clean the filter with a vacuum cleaner. Close the filter. 5. If necessary remove fluff from the filter socket and gasket. You can use a vacuum cleaner. Place the filter back inside the filter socket. 3. Push the plastic connection back in and place the water container back into position. 4. To continue the programme press the Start/Pause button. 10.3 Cleaning the condenser If the symbol Condenser flashes on the display, inspect the condenser and its compartment. If it is dirty, clean it. To inspect: 1. Open the door. 2. Open the condenser cover. 10.2 Emptying the water container Empty the condensed water container after each drying cycle. If the condensed water container is full, the programme stops automatically. The Tank symbol comes on the display and you must empty the water container. To empty the water container: 1. Pull the water container out keeping it in a horizontal position. 3. Turn 2 levers to unlock the condenser lid. 4. Lower the condenser lid.