AEG T7DBG842R User Manual - Page 18

Care And Cleaning

Get AEG T7DBG842R PDF manuals and user guides View all AEG T7DBG842R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

18 www.aeg.com must first filter the water to eliminate remaining textile fibres (simple coffee filter is suitable). • Always keep the airflow slots at the bottom of the appliance clear. • Make sure there is good airflow where the appliance is to be installed. 9.2 Adjustment of default dryness level To change the default dryness level: 1. Turn the appliance on. 2. Wait approximately 8 seconds. 3. Select 1 of the available programmes. 4. Touch and hold down the Dryness Level and Refresh buttons at the same time. One of the symbols appears on the display: - Maximum dryness - Extra dryness - Standard dryness 5. Touch the Start/Pause button repeatedly until you reach the desired dryness level. Dryness level Display symbol Maximum dryness Extra dry‐ ness 10. CARE AND CLEANING Dryness level Display symbol Standard dryness 6. To memorise the setting touch and hold down the Dryness Level and Refresh buttons at the same time for approximately 2 seconds. 9.3 Deactivating the tank indicator The water container indicator is activated by default. It illuminates at the end of the drying cycle or during the cycle if the water reservoir is full. If the draining kit is installed the water container is drained automatically and the indicator can be deactivated. To deactivate the indicator: 1. Turn the appliance on. 2. Wait approximately 8 seconds. 3. Select 1 of the available programmes. 4. Touch and hold down Refresh and Time Drying buttons at the same time. One of 2 configurations is possible: • the Tank indicator: is on if the symbol appears - the water container indicator is permanently activated • the Tank indicator: is off if the symbol appears - the water container indicator is permanently deactivated 10.1 Cleaning the filter At the end of each cycle the Filter symbol comes on the display and you must clean the filter. The filter collects the lint during the drying cycle. To achieve the best drying performances clean the filter regularly , clogged filter lead to longer cycles and energy consumption increase. Use your hand to clean the filter , and if necessary , a vacuum cleaner .

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
must first filter the water to eliminate
remaining textile fibres (simple coffee
filter is suitable).
•
Always keep the airflow slots at the
bottom of the appliance clear.
•
Make sure there is good airflow where
the appliance is to be installed.
9.2 Adjustment of default
dryness level
To change the default dryness level:
1.
Turn the appliance on.
2.
Wait approximately 8 seconds.
3.
Select 1 of the available
programmes.
4.
Touch and hold down the
Dryness
Level
and
Refresh
buttons at the
same time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
5.
Touch the
Start/Pause
button
repeatedly until you reach the
desired dryness level.
Dryness
level
Display symbol
Maximum
dryness
Extra dry‐
ness
Dryness
level
Display symbol
Standard
dryness
6.
To memorise the setting touch and
hold down the
Dryness Level
and
Refresh
buttons at the same time for
approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1.
Turn the appliance on.
2.
Wait approximately 8 seconds.
3.
Select 1 of the available
programmes.
4.
Touch and hold down
Refresh
and
Time Drying
buttons at the same
time.
One of 2 configurations is possible:
•
the Tank indicator:
is on if the
symbol
appears - the
water container indicator is
permanently
activated
•
the Tank indicator:
is off if the
symbol
appears - the
water container indicator is
permanently
deactivated
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
Filter
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
www.aeg.com
18