AEG T7DEE832R User Manual - Page 18

Troubleshooting

Get AEG T7DEE832R PDF manuals and user guides View all AEG T7DEE832R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

18 www.aeg.com 11. TROUBLESHOOTING Problem 1) Possible cause Remedy The tumble dryer is not connected Connect to the mains socket. to the mains supply. Check fuse in fuse box (domestic installation). The tumble dryer does not operate. The door is open. The On/Off button was not pushed. Close the door. Push the On/Off button. The Start/Pause button was not touched. Touch the Start/Pause button. The appliance is in standby mode. Push the On/Off button. Incorrect program selection. Select a suitable program. 2) The filter is clogged. Clean the filter. 3) Dryness Level option was set to iron dry.4) Change Dryness Level option to higher level. Unsatisfactory drying result. The load was too large. The airflow slots are clogged. Do not exceed the maximum load size. Clean the airflow slots at the bottom of the appliance. Dirt on the humidity sensor in the Clean the front surface of the drum. drum. Dryness level not set to desired level. Adjust the dryness level. 5) The condenser is clogged. Clean the condenser. 3) The loading door does not close The filter is not locked into position. Laundry is trapped between the door and the seal. Put the filter in the correct position. Remove trapped items and close the door. Not possible to After cycle start it is not possible to Turn the tumble dryer off and on. change the pro- change the program or option. Change the program or option as gram or option. required. Not possible to The option you tried to select is select an option. not available for the selected proAcoustic signal gram. is emitted. Turn the tumble dryer off and on. Change the program or option as required.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
11.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect to the mains socket.
Check fuse in fuse box (domestic
installation).
The door is open.
Close the door.
The On/Off button was not push-
ed.
Push the On/Off button.
The Start/Pause button was not
touched.
Touch the Start/Pause button.
The appliance is in standby mode.
Push the On/Off button.
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program.
2)
The filter is clogged.
Clean the filter.
3)
Dryness Level option was set to
iron dry
.
4)
Change Dryness Level option to
higher level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bot-
tom of the appliance.
Dirt on the humidity sensor in the
drum.
Clean the front surface of the
drum.
Dryness level not set to desired
level.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
The loading
door does not
close
The filter is not locked into posi-
tion.
Put the filter in the correct posi-
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
Not possible to
change the pro-
gram or option.
After cycle start it is not possible to
change the program or option.
Turn the tumble dryer off and on.
Change the program or option as
required.
Not possible to
select an option.
Acoustic signal
is emitted.
The option you tried to select is
not available for the selected pro-
gram.
Turn the tumble dryer off and on.
Change the program or option as
required.
www.aeg.com
18