AIWA AVJ-X33 Operating Instructions - Page 11
Connections, Connecting to a TV
View all AIWA AVJ-X33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PREPARATION Connections Connecting to a TV Make one of the following connections, depending on the capabilities of your existing equipment. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR or other devices as necessary to make the best connections. - Make sure the DVD Receiver is connected directly to the TV. Select the correct AV input on your TV. - Do not connect your DVD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Video connection Connect the MONITOR OUT VIDEO jack on the DVD Receiver to the video in jack on the TV using the video cable (V). S-Video connection Connect the S-VIDEO OUT jack on the DVD Receiver to the S-Video in jack on the TV using the S-Video cable (S). Component Video (Color Stream®) connection Connect the COMPONENT VIDEO OUT jacks on the DVD Receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C). Rear of TV S-VIDEO INPUT VIDEO INPUT L COMPONENT VIDEO INPUT Y Pb Pr S V C (not supplied) (not supplied) VIDEO S VIDEO (DVD ONLY) MONITOR OUT Y PB/CB PR/CR COMPONENT VIDEO OUT Rear of DVD Receiver 11