AIWA CDC-X417 Operating Instructions - Page 8
Troubleshooting, Maintenance - service manual
View all AIWA CDC-X417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CD Changer indicator Track number CD number 1 Press FNC repeatedly to display "CD-CH." The CD Changer play starts. To Press Skip to the next track t Skip back to the beginning of the current track or to the r previous track Advance rapidly to locate a desired point and hold t, then release it at the desired point Reverse rapidly to locate a desired point and hold r, then release it at the desired point Start CD Changer play from DISCN the first track on the next disc Start CD Changer play from DISCM the first track on the previous disc Intro Play You can locate a desired track by monitoring the first 10 seconds of all the tracks on the CDs in the disc magazine. 1 Press INT during CD Changer play. "SCAN" appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play. One track Repeat Play You can play a track repeatedly. 1 Press REP1 during CD Changer play. "REPEAT1" appears in the display. To cancel Repeat Play, press REP1 again. One disc Repeat Play You can play all tracks on a disc repeatedly. 1 Press REP during CD Changer play. "REPEAT" appears in the display. To cancel Repeat Play, press REP again. Random Play You can play all the tracks on the CDs in the disc magazine in random order. 1 Press RNDM during CD Changer play. "RANDOM" appears in the display. To cancel Random Play, press RNDM again. Note Pressing r during Random Play locates the beginning of the current track. The unit does not retrieve previous tracks during Random Play. 7 ENGLISH TROUBLESHOOTING Error code In the following cases the corresponding error code indication appears. Follow the suggestions below to solve such problems. If the error code indication does not disappear, consult an AIWA service center. E01* The disc magazine is not properly inserted in the CD Changer. Reinsert the magazine. Refer to the instruction manual for the CD Changer. E02* No CDs are loaded in the disc magazine. Insert CDs properly. Refer to the instruction manual for the CD Changer. E03 Focus error. Check that the CD is loaded properly (right side up, etc.), and the CD contains valid data. E04* Problem with the CD Changer. Reset the unit by pressing the Reset button. If this does not solve the problem, consult an AIWA service center. * CDC-X517M only Reset button If a CD does not operate properly, press the reset button with a pointed object such as a pencil, etc. Note that all your settings will be erased if this button is pressed. Reset button MAINTENANCE Cleaning the front panel Wipe the surface with a soft, dry cloth. Cleaning the connector The connector needs to be cleaned occasionally. Wipe the surface of the connector with a cotton swab slightly moistened with alcohol. Back of the front panel