AIWA CSD-FD81 Operating Instructions - Page 9

Specifications Tuner section Frequency range, antenna - FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz/step) Ferrite bar antenna Deck section Track format - 4 tracks, 2 channels / Frequency range - Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system - AC bias / Erasing system - Magnet erase / Heads - Recording/playback head (1), Erasure head (1) CD player section Disc - Compact disc / Scanning method - Non-contact optical scanner (semiconductor laser) General Speaker - 100 mm cone type (2), 36 mm cone type (2) / Output - Headphones jack (stereo mini-jack) / Power output - 2.5 W + 2.5 W (EIAJ 7 ohms DC) / Power requirements - DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption - 12 W Dimensions (W x H x D) - 460 x 191.9 x 261.2 mm (181/8 x 75/8 x 103/8 in.) Weight (excluding batteries) - 4 kg (8 lbs. 13 oz.) Accessories - Remote control (1, except for CSD-FD71), AC cord (1) • Specifications and external appearance are subject to change without notice. COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; - high frequency sound is not emitted - the sound is not adequately high - the sound is off-balance - the tape cannot be erased - the tape cannot be recorded on After every 10 hours of use, clean the tape heads with a head cleaning cassette. Use separately sold dry-type or wet-type cleaning cassette. Refer to the instructions of the cleaning cassette for details. To clean the lens Use a cotton swab slightly moistened with cleaning fluid. Wipe gently from the center to the edge. Lens eP NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: .... Reorient or relocate the receiving antenna. .... Increase the separation between the equipment and receiver. .... Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .... Consult the dealer or an experienced radio/TV technician for help. CAUTION Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user's right or authority to operate this product. ENGLISH 9