AIWA XD-AX10 Operating Instructions - Page 54
Setting the digital output signal
View all AIWA XD-AX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
◆ DOWNMIX (DVD only) Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "Checking the audio signal format" (page 41). This function affects the output of the following jacks: - LINE OUT L/R (AUDIO) jacks - DIGITAL OUT (COAXIAL) jack when "DOLBY DIGITAL" is set to "D-PCM" (page 54). DOLBY SURROUND Normally, select this position. Multi-channel audio signals are output to two channels for enjoying surround sounds. NORMAL Multi-channel audio signals are downmixed to two channels for use with your stereo. ◆ DIGITAL OUT Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack. ON Normally select this position. When you select "ON," see "Setting the digital output signal" for further settings. OFF The influence of the digital circuit upon the analog circuit is minimal. Setting the digital output signal Switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) or MD deck with a digital input jack. For connection details, see page 18. Select "DOLBY DIGITAL" and "DTS" after setting "DIGITAL OUT" to "ON." AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. ◆ DOLBY DIGITAL (DVD only) Selects the type of Dolby Digital signal. D-PCM DOLBY DIGITAL Select this when the player is connected to an audio component without a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the "DOWNMIX" item in "AUDIO SETUP" (page 54). Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. ◆ DTS (DVD only) Selects whether or not to output DTS signals. OFF ON Select this when the player is connected to an audio component without a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. 54