AOC LM560 LM560 Manual - Page 16
Error, Message & Possible, Solution, Cable Not Connected, Input Not Supported
View all AOC LM560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector's screws. 2. Check the signal-cable's connection pins for damage. INPUT NOT SUPPORTED : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table (See page 17). 14
14
ERROR
MESSAGE & POSSIBLE
SOLUTION
CABLE NOT CONNECTED :
1.
Check that the signal-cable is properly connected , If the connector is
loose,
tighten the connector’s screws.
2.
Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORTED :
Your computer has been set to unsuitable display mode ,set the computer to
display mode given in the following table (See page 17).