AOC e2043f User's Manual_e2043F - Page 13

Wall Mounting

Page 13 highlights

Wall Mounting Preparing to Install An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1 Place monitor on the firm surface (such as, table) 2 Use your hands to hold the monitor base 3 Use your hands to fold the monitor base as figure instructed above by switch safety lock to the right side 4 Once the monitor base begin to fold you can release the safety lock (caution: you must hear "click" after you fold the monitor base to wall mount position to ensure safety lock is lock properly.) 5 Follow the manufacturer's instructions to assemble the wall mounting arm. 6 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. 7 Insert the 4 screws into the holes and tighten. 8 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

13
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately.
Disconnect power before this procedure. Follow these steps:
1
Place monitor on the firm surface (such as, table)
2
Use your hands to hold the monitor base
3
Use your hands to fold the monitor base as figure instructed above by switch
safety lock to the right side
4
Once the monitor base begin to fold you can release the safety lock (caution: you
must hear “click” after you fold the monitor base to wall mount position to
ensure safety lock is lock properly.)
5
Follow the manufacturer's instructions to assemble the wall mounting arm.
6
Place the wall mounting arm onto the back of the monitor. Line up the holes of
the arm with the holes in the back of the monitor.
7
Insert the 4 screws into the holes and tighten.
8
Reconnect the cables.
Refer to the user's manual that came with the optional
wall mounting arm for instructions on attaching it to the wall.
Noted :
VESA mounting screw holes are not available for all models, please check
with the dealer or official department of AOC.