ASRock 775V88 User Manual - Page 27
Command Rate. The default value is [2T Command]. - free installer
View all ASRock 775V88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Flexibility Option The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled]. DRAM CAS# Latency Use this item to adjust the means of memory accessing. Configuration options: [Auto], [2.5], [2], and [3]. DRAM Command Rate Use this to select among [2T Command] and [1T Command] for DRAM Command Rate. The default value is [2T Command]. DRAM Bus Selection The default value is [Auto], which will automatically select the proper access mode for the system. You may select between [Single Channel] and [Dual Channel] if you have properly set the dual channel memory configuration. DRAM Voltage Use this to select among [Normal] and [High] for DRAM Voltage. The default value is [Normal]. AGP Voltage Use this to select among [Normal] and [High] for AGP Voltage. The default value is [High]. Primary Graphics Adapter This allows you to select [PCI] or [AGP] as the primary graphics adapter. The default vaule is [PCI]. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. AGP Mode The default value of this feature is set to [Auto]. If you install an 8X-AGP card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP mode as [Auto], [4X], [2X], or [1X]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant. 27