ASRock 775VM800Pro-DDR2 User Manual - Page 15

2.5 Installation of Memory Modules (DIMM) 775VM800Pro-DDR2 motherboard provides two 240-pin DDRII (Double Data Rate) DIMM slots. It is not allowed to install DDR into DDRII slot; otherwise, this motherboard and DIMM may be damaged. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. 15