ASRock 775i915PL-SATA2 User Manual - Page 16
Expansion Slots PCI, PCI Express, and AGI Express, Slots PCI Express x 4, Installing an expansion
View all ASRock 775i915PL-SATA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2.6 Expansion Slots (PCI, PCI Express, and AGI Express Slots (PCI Express x 4)) There are 4 PCI slots, 2 PCI Express slots, and 1 AGI Express slot (PCI Express x 4) on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x 16 slot) is used for PCI Express cards with x16 lane width graphics cards. PCIE2 (PCIE x 1 slot) is used for PCI Express cards, such as Gigabit LAN card, SATA2 card, etc. Please check the jumper set tings on page 17 for different functions. AGI Express slot (PCI Express x 4): AGI Express slot (PCI Express x 4) is used to install PCI Express expansion cards. For the information of the compatible PCI Express VGA cards, please refer to the "Supported PCI Express VGA Card List for AGI Express Slot (PCI Express x 4)" on page 8. Please check the jumper settings on page 17 for different functions. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step 3. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 4. Fasten the card to the chassis with screws. 16