ASRock 845GV-M User Manual - Page 6

CAUTION! 1. About the setting of "Hyper Threading Technology", please check page 23. 2. Please check the table below for the memory support frequency and its corresponding CPU FSB frequency. CPU FSB Frequency 533 400 Memory Support Frequency DDR266, DDR333 DDR266 3. While CPU overheat is detected, the system will automatically shutdown. Please check if the CPU fan on the motherboard functions properly before you resume the system. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 4. Because the installed AMR card will occupy the same external connecting position with the PCI card installed in "PCI3" slot, you will not be able to install any PCI card in "PCI3" slot if an AMR card has already been installed in the AMR slot. 5. The AGI 8X slot is a special design that only supports compatible AGP VGA cards. For the information of the compatible AGP VGA cards, please refer to the "Supported AGP VGA Cards List" on page 7/8. For the proper installation of AGP VGA card, please refer to the installation guide on page 14. 6. Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1/2000 SP4. It may not work properly under Microsoft® Windows® 98/ME. Please refer to Microsoft® official document at http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx 7. Although this motherboard offers stepless control, it is not recommended to perform over clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. 6