ASRock 890GX Extreme3 Quick Installation Guide - Page 28
English, 9 Onboard Headers and Connectors
View all ASRock 890GX Extreme3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2.9 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors (SATA3_1_2: see p.2, No. 17) (SATA3_3_4: see p.2, No. 16) (SATA3_5_6: see p.2, No. 15) These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. SATA3_1_2 SATA3_3_4 SATA3_5_6 Serial ATA (SATA) Data Cable (Optional) Either end of the SATA data cable can be connected to the SATA3 hard disk or the SATA3 connector on this motherboard. Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply eSATA3 Bracket (Optional) Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. eSATA3 bracket can be connected to the SATA3 connector to support the external SATA3 device. English 28 ASRock 890GX Extreme3 Motherboard