ASRock A320M Pro4 User Manual - Page 39
Step 3, the nut to be used. Hand tighten
![]() |
View all ASRock A320M Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
C B A C B A C B A C B A Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. English 34
![](/manual_guide/products/asrock-a320m-pro4-user-manual-3979d3f/39.png)
English
34
Step 3
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location C by default. Skip Step 3
and 4
and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
A
B
C
A
B
C
B
C
A
A
B
C