ASRock A88M-G/3.1 User Manual - Page 22

A88M-G/3.1 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors (SATA3_1: see p.6, No. 16) (SATA3_2: see p.6, No. 15) (SATA3_3: see p.6, No. 14) (SATA3_4: see p.6, No. 13) (SATA3_5: see p.6, No. 10) (SATA3_6: see p.6, No. 11) (SATA3_7: see p.6, No. 8) (SATA3_8: see p.6, No. 9) SATA3_2 SATA3_4 SATA3_1 SATA3_3 USB 2.0 Headers (9-pin USB_3_4) (see p.6 No. 21) (9-pin USB_5_6) (see p.6 No. 22) USB_PWR PP+ GND DUMMY 1 GND P+ PUSB_PWR SATA3_5 SATA3_7 SATA3_6 SATA3_8 These eight Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. Besides two default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. USB 3.0 Header (19-pin USB3_3_4) (see p.6 No. 7) ID IntA_P_D+ IntA_P_DGND IntA_P_SSTX+ IntA_P_SSTXGND IntA_P_SSRX+ IntA_P_SSRXVbus 1 Vbus IntA_P_SSRX- IntA_P_SSRX+ GND IntA_P_SSTXIntA_P_SSTX+ GND IntA_P_DIntA_P_D+ Besides two default USB 3.0 ports on the I/O panel, there is one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports. English 17