ASRock AD2700-ITX Quick Installation Guide - Page 22

Print Port Header (25-pin LPT1) (see p.2 or 3 No. 1) AFD# ERROR# PINIT# SLIN# GND 1 SPD7 SPD6 ACK# SPD5 BUSY SPD4 PE SPD3 SLCT SPD2 SPD1 SPD0 STB# This is an interface for print port cable that allows convenient connection of printer devices. Serial port Header (9-pin COM1) (see p.2 or 3 No. 2) This COM1 header supports a serial port module. 2.9 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. 2.10 Installing Windows® 7 on SATA / SATAII HDDs If you want to install Windows® 7 OS on your SATA / SATAII HDDs, please follow below steps. Using SATA / SATAII HDDs with NCQ function STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen B. Set the option "SATA Mode" to [AHCI]. STEP 2: Install Windows® 7 OS on your system. Storage Configuration. Using SATA / SATAII HDDs without NCQ function STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen B. Set the option "SATA Mode" to [IDE]. STEP 2: Install Windows® 7 OS on your system. Storage Configuration. 22 ASRock AD2700-ITX / AD2500-ITX Motherboard English