ASRock AD525PV3 Quick Installation Guide - Page 10
English, 3 Installation of Memory Modules DIMM, Installing a DIMM - ddr3
View all ASRock AD525PV3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2.3 Installation of Memory Modules (DIMM) AD525PV3 / AD425PV3 motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots. It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be damaged. Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. 10 ASRock AD525PV3 / AD425PV3 Motherboard English