ASRock B250M-HDV User Manual - Page 29
Step 3, NGFF SSD module into the M.2
![]() |
View all ASRock B250M-HDV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
5 4 3 2 1 E D C B A E D C B A E D C B A C B A E D NUT2 NUT1 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. English 24
![](/manual_guide/products/asrock-b250mhdv-user-manual-2c1d5c5/29.png)