ASRock B365M Phantom Gaming 4 Quick Installation Guide - Page 34
Step 3, Step 4, Step 5, Step 6
View all ASRock B365M Phantom Gaming 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
D C B A D C B A D C B A Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. English D C B A 20o D C NUT2 NUT1 32 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
English
32
A
B
C
D
Step 3
Move the stando´ based on the
module type and length.
Te stando´ is placed at the nut
location C by default. Skip Step 3
and 4
and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the stando´ by
hand.
A
B
C
D
Step 4
Peel o´ the yellow protective Flm on
the nut to be used. Hand tighten the
stando´ into the desired nut location
on the motherboard.
A
B
C
D
A
B
C
D
20
o
Step 5
Align and gently insert the M.2
(NG²²) SSD module into the M.2
slot.
Please be aware that the M.2
(NG²²) SSD module only Fts in one
orientation.
NUT1
NUT2
C
D
Step 6
³ighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.