ASRock B560M-HDV/M.2 User Manual - Page 29
Step 3, Step 4, Step 5, Step 6
View all ASRock B560M-HDV/M.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
B A B A B A B560M-HDV/M.2 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location B by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one 20o orientation. English B A B NUT2 NUT1 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. 25
25
English
B560M-HDV/M.2
Step 3
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location B by default. Skip Step 3 and
4 and go straight to Step
5
if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
B
A
B
A
NUT1
NUT2
B
A
B
20
o
A
B