ASRock C621A WS RAID Installation Guide - Page 1

ASRock C621A WS Manual

Page 1 highlights

Configuring a RAID array Using UEFI Setup Utility The BIOS screenshots in this guide are for reference only and may differ from the exact settings for your motherboard. The actual setup options you will see shall depend on the motherboard you purchase. Please refer to the product specification page of the model you are using for information on RAID support. Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. Caution: Please use identical PCIE SSDs that are of the same type and capacity. RAID including a PCIe SSD in a Hyper M.2 slot is only available with an Intel® SSD in that slot. STEP 1: Enter the UEFI Setup Utility by pressing or right after you power on the computer. STEP 2: Go to Boot\CSM and set CSM to [Disabled]. STEP 3: Go to Advanced Storage Configuration and set SATA Mode Selection to [RAID Mode], then press to save the configuration changes and exit setup. 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

1
Configuring a RAID array Using UEFI Setup Utility
The BIOS screenshots in this guide are for reference only and may differ from the exact settings
for your motherboard. The actual setup options you will see shall depend on the motherboard
you purchase. Please refer to the product specification page of the model you are using for
information on RAID support. Because the motherboard specifications and the BIOS software
might be updated, the content of this documentation will be subject to change without notice.
Caution:
Please use identical PCIE SSDs that are of the same type and capacity. RAID including a PCIe
SSD in a Hyper M.2 slot is only available with an IntelĀ® SSD in that slot.
STEP 1:
Enter the UEFI Setup Utility by pressing <F2> or <Del> right after you power on the computer.
STEP 2:
Go to Boot\CSM and set CSM to [Disabled].
STEP 3:
Go to Advanced Storage Configuration and set SATA Mode Selection to [RAID Mode], then
press <F10> to save the configuration changes and exit setup.