ASRock FM2A58M-HD User Manual - Page 26
Onboard Headers and Connectors, These six Serial ATA2
View all ASRock FM2A58M-HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
FM2A58M-HD+ 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA2 Connectors (SATA_1: see p.10, No. 8) (SATA_2: see p.10, No. 9) (SATA_3: see p.10, No. 13) (SATA_4: see p.10, No. 12) (SATA_5: see p.10, No. 15) (SATA_6: see p.10, No. 14) SATA_5 SATA_1 SATA_2 SATA_3 SATA_4 SATA_6 These six Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate. USB 2.0 Headers (9-pin USB6_7) (see p.10 No. 16) (9-pin USB8_9) (see p.10 No. 17) USB_PWR PP+ GND DUMMY 1 GND P+ PUSB_PWR Besides six default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. Front Panel Audio Header (9-pin HD_AUDIO1) (see p.10 No. 20) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This is an interface for the front panel audio cable that allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. English 21