ASRock FM2A75M-DGS Quick Installation Guide - Page 21
English, Installing Windows, 7 64-bit / Vista, Vista, With RAID Functions, Driver Installation Guide - motherboard drivers
View all ASRock FM2A75M-DGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2.7 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. 2.8 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit With RAID Functions If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit on your SATA3 HDDs with RAID functions, please refer to the document at the following path in the Support CD for detailed procedures: ..\ RAID Installation Guide RAID mode is not supported under Windows® XP. 2.9 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP Without RAID Functions If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP OS on your SATA3 HDDs without RAID functions, please follow below procedures according to the OS you install. 2.9.1 Installing Windows® XP Without RAID Functions If you want to install Windows® XP on your SATA3 HDDs without RAID functions, please follow below steps. AHCI mode is not supported under Windows® XP. Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode) STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Configuration. B. Set the "SATA Mode" option to [IDE]. STEP 2: Install Windows® XP OS on your system. Storage English 21 ASRock FM2A75M-DGS Motherboard