ASRock Fatal1ty Z270 Gaming-ITX/ac User Manual - Page 31
Front Panel Audio Header, pin CPU_FAN1 - manual
View all ASRock Fatal1ty Z270 Gaming-ITX/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Fatal1ty Z270 Gaming-ITX/ac Series Front Panel Audio Header (9-pin HD_AUDIO1) (see p.7, No. 17) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This header is for connecting audio devices to the front audio panel. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Speaker Header (4-pin SPEAKER1) (see p.7, No. 12) DUMMY SPEAKER 1 +5V DUMMY Please connect the chassis speaker to this header. Chassis Fan Connector FAN_SPEED Please connect fan cables (4-pin CHA_FAN1) FAN_VOLTAGE_CONTROL GND FAN_SPEED_CONTROL to the fan connector and (see p.7, No. 1) match the black wire to the ground pin. CPU Fan Connector (4-pin CPU_FAN1) (see p.7, No. 3) FAN_SPEED This motherboard pro- FAN_VOLTAGE_CONTROL FAN_SPEED_CONTROL GND vides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. English 23