ASRock G41C-VS User Manual - Page 28
OC Tweak, weaker Screen, er Screen - overclock
View all ASRock G41C-VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit OC Tweaker Settings DRAM Frequency DRAM Command Rate DRAM Timing Configuration [Auto] [Auto] If you adopt DDR3 1333 pls. adjust jumper set MB before apply it. For FSB1333 CPU: FSB1 = 2-3 Ratio Status Unlocked (Min:06, Max:17) Ratio CMOS Setting 17 [17] Intel (R) SpeedStep (tm) tech. [Disabled] Overclock Mode [Auto] CPU Frequency (MHz) [200] PCIE Frequency (MHz) [100] DRAM Voltage NB Voltage VTT Voltage GTLRef Voltage 1.53V 1.23V 1.20V 0.63Vtt [Auto] [Auto] [Auto] [Auto] Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [400MHz DDR3_800], [533MHz DDR3_1066] or [667MHz DDR3_1333] for DDR3 or [266MHz DDR2_533], [333MHz DDR2_667] or [400MHz DDR2_800] for DDR2. The configuration options depend on the CPU and memory module you adopt on this motherboard. Please refer to page 8 for the CPU FSB frequency and its corresponding memory support frequency. DRAM Command Rate Use this item to adjust DRAM Command Rate. Configurationoptions: [1N], [2N] and [Auto]. 28