ASRock G43Twins-FullHD User Manual - Page 8

Caution - overclock

Page 8 highlights

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore OS - Microsoft® Windows® 2000 / XP / XP 64-bit / VistaTM / VistaTM 64-bit compliant (see CAUTION 16) Certifications - FCC, CE, WHQL * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the thirdparty overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. CAUTION! 1. About the setting of "Hyper Threading Technology", please check page 41. 2. This motherboard supports Untied Overclocking Technology. Please read "Untied Overclocking Technology" on page 36 for details. 3. This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 19 for proper installation. 4. Please check the table below for the CPU FSB frequency and its corresponding memory support frequency. CPU FSB Frequency Memory Support Frequency 1333 DDR2 667, DDR2 800, DDR2 1066, DDR3 800, DDR3 1066 1066 DDR2 667, DDR2 800, DDR2 1066, DDR3 800, DDR3 1066 800 DDR2 667, DDR2 800, DDR3 800 * DDR2 1066 memory modules will operate in overclocking mode. * If you adopt a DDR2 1066 memory module on this motherboard, you need to adjust the jumpers. Please refer to page 24 for proper jumper settings. 5. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® XP and Windows® VistaTM. For Windows® XP 64-bit and Windows® VistaTM 64-bit with 64-bit CPU, there is no such limitation. 6. The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check Intel® website for the latest information. 7. This motherboard supports three VGA output options: D-Sub, DVI-D and DisplayPort. D-Sub port is on the I/O panel. DVI-D and DisplayPort are supported when you install the bundled ASRock DVI_DisplayPort Card on PCIE2 (green) slot. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

8
CAUTION!
1.
About the setting of
“Hyper Threading Technology”, please check page 41.
2.
This motherboard supports Untied Overclocking Technology. Please read
“Untied Overclocking Technology” on page 36 for details.
3.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the
installation guide of memory modules on page 19 for proper installation.
4.
Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
Memory Support Frequency
1333
DDR2 667, DDR2 800, DDR2 1066,
DDR3 800, DDR3 1066
1066
DDR2 667, DDR2 800, DDR2 1066,
DDR3 800, DDR3 1066
800
DDR2 667, DDR2 800,
DDR3 800
*
DDR2 1066 memory modules will operate in overclocking mode.
*
If you adopt a DDR2 1066 memory module on this motherboard,
you need to adjust the jumpers. Please refer to page 24 for proper
jumper settings.
5.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
®
XP
and Windows
®
Vista
TM
. For Windows
®
XP 64-bit and Windows
®
Vista
TM
64-bit with 64-bit CPU, there is no such limitation.
6.
The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check Intel
®
website for the latest information.
7.
This motherboard supports three VGA output options: D-Sub, DVI-D and
DisplayPort. D-Sub port is on the I/O panel. DVI-D and DisplayPort are
supported when you install the bundled ASRock DVI_DisplayPort Card on
PCIE2 (green) slot.
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore
OS
- Microsoft
®
Windows
®
2000 / XP / XP 64-bit / Vista
TM
/
Vista
TM
64-bit compliant (see
CAUTION 16
)
Certifications
- FCC, CE, WHQL
* For detailed product information, please visit our website:
http://www
.a
srock.com