ASRock GE PRO-HT R3.0 User Manual - Page 6
Caution
View all ASRock GE PRO-HT R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CAUTION! 1. About the setting of "Hyper Threading Technology", please check page 21. 2. While CPU overheat is detected, the system will automatically shutdown. Please check if the CPU fan on the motherboard functions properly before you resume the system. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 3. Power Management for USB 2.0 works fine under Microsoft® Windows® XP. It may not work properly under Microsoft® Windows® 98/ME/2000. Please refer to Microsoft® official document at http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx 4. Although GE Pro-HT / GE Pro-M2 offers stepless control, it is not recommended to perform over clocking. When the CPU frequency of GE Pro-HT / GE Pro-M2 is set to perform over clocking, other clocks, such as PCI clock, AGP clock and Memory clock will also be overclocked proportionally. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU and the motherboard. 6