ASRock H410M-HDVP2 User Manual - Page 28
Warning: Please make, sure that the power cable, connected is for the CPU, and not the graphics
View all ASRock H410M-HDVP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
H410M-HDVP H410M-HDVP2 Chassis/Water Pump Fan 1 Connector 2 3 (4-pin CHA_FAN1/WP) 4 (see p.6, No. 18 or p.8, No. 19) GND FAN_VOLTAGE CHA_FAN_SPEED FAN_SPEED_CONTROL This motherboard provides one 4-Pin water cooling chassis fan connector. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3. Chassis Fan Connector (4-pin CHA_FAN2) (see p.6, 8, No. 12) GND +12V CHA_FAN_SPEED FAN_SPEED_CONTROL 1 2 3 4 Please connect fan cables to the fan connector and match the black wire to the ground pin. CPU Fan Connector (4-pin CPU_FAN1) (see p.6, 8, No. 2) +12V CPU_FAN_SPEED GND FAN_SPEED_CONTROL 1 2 3 4 This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. ATX Power Connector (24-pin ATXPWR1) (see p.6, 8, No. 4) 12 24 1 13 This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. ATX 12V Power Connector (8-pin ATX12V1) (see p.6, 8, No. 1) 8 5 This motherboard provides a 8-pin ATX 12V 4 1 power connector. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5. *Warning: Please make sure that the power cable connected is for the CPU and not the graphics card. Do not plug the PCIe power cable to this connector. 23 English