ASRock H610M-HVS/M.2 R2.0 User Manual - Page 50
Ring to Core Ratio Offset, Intel Turbo Boost Max Technology 3.0
View all ASRock H610M-HVS/M.2 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
H610M-HDV/M.2 R2.0 H610M-HVS/M.2 R2.0 CPU Cache Ratio The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU Ratio. BCLK Aware Adaptive Voltage BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware of the BCLK frequency when calculating the CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides. Boot Performance Mode Select the performance state that the BIOS will set before OS handoff. Ring to Core Ratio Offset Disable Ring to Core Ratio Offset so the ring and core can run at the same frequency. SA PLL Frequency Configure SA PLL Frequency. BCLK TSC HW Fixup BCLK TSC HW Fixup disable during TSC copy from PMA to APIC. FLL Overclocking Mode Nominal is good for normal core ratio overclocking. Elevated and Extremely El¬evated are good for high BCLK OC. Intel SpeedStep Technology Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation. Intel Turbo Boost Technology Intel Turbo Boost Technology enables the processor to run above its base operating frequency when the operating system requests the highest performance state. Intel Speed Shift Technology Enable/Disable Intel Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-sates. Intel Turbo Boost Max Technology 3.0 Intel Turbo Boost Technology enables the processor to run above its base operating frequency when the operating system requests the highest performance state. 43 English