ASRock K7VT6-C User Manual

ASRock K7VT6-C Manual

ASRock K7VT6-C manual content summary:

  • ASRock K7VT6-C | User Manual - Page 1
    K7VT6-C User Manual Version 1.0 Published December 2004 Copyright©2004 ASRock INC. All rights reserved. 1
  • ASRock K7VT6-C | User Manual - Page 2
    any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
  • ASRock K7VT6-C | User Manual - Page 3
    3. BIOS Setup 17 3.1 BIOS Setup Utility 17 3.1.1 BIOS Menu Bar 17 3.1.2 Legend Bar 17 3.2 Main Menu 18 3.3 Advanced, Security, Power, Boot, and Exit Menus 20 4. Software Support 21 4.1 Install Operating System 21 4.2 Support CD Information 21 4.2.1 Running Support CD 21 4.2.2 Drivers Menu
  • ASRock K7VT6-C | User Manual - Page 4
    latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents 1 x ASRock K7VT6-C Motherboard (ATX Form Factor: 12.0-in x 7.0-in, 30.5 cm x 17.8 cm) 1 x ASRock K7VT6-C Quick Installation Guide 1 x ASRock K7VT6-C Support CD 1 x Ultra ATA 66
  • ASRock K7VT6-C | User Manual - Page 5
    Factor: 12.0-in x 7.0-in, 30.5 cm x 17.8 cm CPU: Supports Socket A (462 pins) for AMD AthlonTM / AthlonTM XP / DuronTM/ SempronTM processor Chipsets: North Bridge: VIA KT600, FSB@200 / 266 / 333 / 400 MHz South Bridge: VIA VT8235CE, Supports USB 2.0, ATA 133 Memory: 2 DDR DIMM Slots: DDR1
  • ASRock K7VT6-C | User Manual - Page 6
    . You must adjust "FSB Select Jumpers" according to the FSB of your AMD CPU before you set the "CPU Host Frequency" configuration as "Manual" in BIOS. See page 13 for the details of "FSB Select Jumpers" adjustment, and page 22 of "User Manual" in the Support CD for "CPU Host Frequency" configuration
  • ASRock K7VT6-C | User Manual - Page 7
    : Mic In 7 24 2Mb 8 BIOS FSB 400 K7VT6-C 23 22 21 20 19 LAN PHY GAME1 1 SUPER I/O AGP 8X 1.5V_AGP1 PCI1 DDR400 PCI2 1 FSB_SEL0 1 FSB_SEL1 1 FSB_SEL2 1 AUDIO1 JR1 JL1 CMOS BATTERY AUDIO CODEC USB2.0 PCI3 1 CLRCMOS2 PCI4 AUX1 CD1 PCI5 FLOPPY1 VIA VT8235CE ATA133 5.1CH
  • ASRock K7VT6-C | User Manual - Page 8
    1.4 ASRock I/O PlusTM 1 2 3 4 5 11 10 9 1 Parallel Port 2 RJ-45 Port 3 Line In (Light Blue) 4 Line Out (Lime) 5 Microphone (Pink) 6 2 x Shared USB 2.0 Port (USB4, USB5) 8 7 6 7 2 x USB 2.0 Port (USB0,
  • ASRock K7VT6-C | User Manual - Page 9
    , peripherals, and/or components. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap
  • ASRock K7VT6-C | User Manual - Page 10
    . Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see page 7, No. 2). For proper installation, please kindly refer to the instruction manuals of the CPU fan and heatsink vendors. 10
  • ASRock K7VT6-C | User Manual - Page 11
    2.3 Installation of Memory Modules (DIMM) K7VT6-C motherboard provides two 184-pin DDR (Double Data Rate) break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly
  • ASRock K7VT6-C | User Manual - Page 12
    AGP Slots) There are 5 PCI slots and 1 AGP slot on K7VT6-C motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten
  • ASRock K7VT6-C | User Manual - Page 13
    jumper cap to short the Clear CMOS jumper for 5 seconds. After shorting the Clear CMOS jumper, please remove the jumper cap. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first
  • ASRock K7VT6-C | User Manual - Page 14
    The jumper caps are not provided by ASRock. Please understand that ASRock does not guarantee and support the adjustment of multiplier. These jumpers setting may not apply to all multiplier-locked or even some unlocked AMD CPU. Frequencies other than the recommended CPU bus frequencies may cause the
  • ASRock K7VT6-C | User Manual - Page 15
    only one IDE device on this motherboard, please set the IDE device as "Master". Please refer to the instruction of your IDE device vendor ASRock I/O PlusTM will not be able to function. Internal Audio Connectors (4-pin CD1, 4-pin AUX1) (CD1: see p.7 item 17) AUX-R GND GND AUX-L CD-R GND GND CD
  • ASRock K7VT6-C | User Manual - Page 16
    RESET# GND HDLEDHDLED+ 1 SPEAKER DUMMY DUMMY +5V Chassis Fan Connector (3-pin CHA_FAN1) (see p.7 item 13) GND +12V CHA_FAN_SPEED This is an interface for front panel audio ground pin. CPU Fan Connector (3-pin CPU_FAN1) (see p.7 item 2) CPU_FAN_SPEED +12V GND Please connect a CPU fan cable to
  • ASRock K7VT6-C | User Manual - Page 17
    motherboard stores the BIOS Setup Utility. You may run the BIOS Setup when you start up the computer. Please press during the PowerOn-Self-Test (POST) to enter the BIOS predetermined choices. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions
  • ASRock K7VT6-C | User Manual - Page 18
    Size L2 Cache Size Total Memory DDR1 DDR2 AMIBIOS SETUP UTILITY - VERSION 3.31a Security Power Boot Exit Dec 20 2004 Mon 20:07:40 [ Setup Help ] Month: Jan - Dec Day: 01 - 31 Year: 1980 - 2099 K7VT6-C BIOS P1.00 AMD Athlon(tm) XP 2600+ 2133 MHz 128 KB 256 KB 512 MB 512
  • ASRock K7VT6-C | User Manual - Page 19
    may due to that the hard disk is too old or too new. If the hard disk was already formatted on an older system, the BIOS Setup may detect incorrect parameters. In these cases, select [User] to manually enter the IDE hard disk drive parameters. After entering the hard disk information into
  • ASRock K7VT6-C | User Manual - Page 20
    for IDE CD/DVD drives. Maximum Capacity This field shows the drive's maximum capacity as calculated by the BIOS based on the drive information you entered. LBA Mode This allows user DMA capability. 3.3 Advanced, Security, Power, Boot, and Exit Menus Detailed descriptions of these menus are listed in
  • ASRock K7VT6-C | User Manual - Page 21
    for more information. 4.2 Support CD Information The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance the motherboard features. 4.2.1 Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive. The
  • ASRock K7VT6-C | User Manual - Page 22
    the FSB setting in BIOS setup to perform over clocking. This is not recommended unless you thoroughly know the feature. Wrong setup may cause problems during operation. Boot Failure Guard Enable or disable the feature of Boot Failure Guard. DRAM Frequency If set to [Auto], the motherboard will
  • ASRock K7VT6-C | User Manual - Page 23
    . AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant
  • ASRock K7VT6-C | User Manual - Page 24
    Vcore Voltage Adjust This feature allows you to adjust the CPU Vcore voltage with two levels. The default value is [Auto]. VCCM Voltage This item allows you to adjust DRAM voltage. Configuration options: [Auto], [High], and [
  • ASRock K7VT6-C | User Manual - Page 25
    EPP Version Parallel Port IRQ Parallel Port DMA Channel OnBoard Midi Port Midi IRQ Select OnBoard Game Port OnBoard IDE OnBoard LAN OnBoard AC' 97 Audio Auto Auto Auto ECP+EPP 1.9 Auto Auto Disabled 5 200h Enabled Enabled Auto to enable or disable the floppy drive controller. F1:Help Esc
  • ASRock K7VT6-C | User Manual - Page 26
    ], [Auto] or [Enabled] for the onboard AC'97 Audio feature. System Hardware Monitor You may check the status of the hardware on your system. It allows you to monitor the parameters for CPU temperature, Motherboard temperature, CPU fan speed, and critical voltage. Advanced AMIBIOS SETUP UTILITY
  • ASRock K7VT6-C | User Manual - Page 27
    UTILITY - VERSION 3.31a Security Power Boot Exit Supervisor Password User Password Set Supervisor Password Set User Password Clear Clear [ Enter ] [ Enter ] selected, the "Password Check" is performed before BIOS setup. If [Always] option is selected, the "Password Check" is performed before
  • ASRock K7VT6-C | User Manual - Page 28
    Suspendto-RAM feature. Select [Auto] will enable this feature if the system supports it. Repost Video on STR Resume This feature allows you to repost video on [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. Ring-In Power On Use this to enable or
  • ASRock K7VT6-C | User Manual - Page 29
    Numeric Lock function after boot-up. Boot To OS/2 This enables boot-up to OS/2 operating system. Boot From Network Use this to enable or disable "boot from network" feature. VIA SATA Raid Utility Use this to enable or disable VIA VT8237 SATA Raid BIOS Utility during POST. Boot Device Priority This
  • ASRock K7VT6-C | User Manual - Page 30
    Boot Exit Exit Saving Changes Exit Discarding Changes Load Default Settings Discard Changes [ Enter ] [ Enter ] [ Enter ] [ Enter ] [ Setup Help ] Exits and saves the changes in CMOS >, it will save the current settings and exit the BIOS SETUP Utility. Exit Discarding Changes After you enter the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

1
K7VT6-C
User Manual
Version 1.0
Published December 2004
Copyright©2004 ASRock INC. All rights reserved.