ASRock K7VT6 User Manual - Page 26
accessing 8-bit ISA cards. Disable this feature when using ISA cards that are - cpu support
View all ASRock K7VT6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chipset Configuration Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Chipset Configuration [ Setup Help ] AGP Mode AGP Aperture Size AGP Fast Write PCI Delay Transaction USB Controller USB Device Legacy Support DRAM CAS# Latency V-Link Speed Over Vcore Voltage VCCM Voltage AGP Voltage Auto 64MB Disabled Disabled Enabled Disabled Auto Normal Disabled Auto Auto to select [4X], [2X], [1X] as the AGP mode. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit AGP Mode This feature will be set to [Auto] as default. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specification requires other sizes. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant. USB Controller Use this to enable or disable the use of USB controller. USB Device Legacy Support Use this to enable or disable the support to emulate legacy I/O devices such as mouse, keyboard,... etc. DRAM CAS# Latency This is used to adjust the means of memory accessing. Configuration options: [Auto], [2T], [2.5T], [3T]. It is recommended to leave this field as [Auto] unless the installed DRAM's specification requires other value. V-Link Speed This feature allows you to speed up the V-Link speed. The default value is [Normal]. 26