ASRock P45XE-R Quick Installation Guide - Page 27
Front Panel Audio Header
View all ASRock P45XE-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Infrared Module Header (5-pin IR1) (see p.2 No. 26 or p.3 No. 25) Internal Audio Connectors (4-pin CD1) (see p.2 No. 35 or p.3 No. 34) Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2 No. 33 or p.3 No. 32) network (WLAN) adapter. It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity. This header supports an optional wireless transmitting and receiving infrared module. This connector allows you to receive stereo audio input from sound sources such as CD1 a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for front panel audio cable that allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select Chipset Configuration. Set the Front Panel Control option from [Auto] to [Enabled]. F. Enter Windows system. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. For Windows® 2000 / XP / XP 64-bit OS: Click "Audio I/O", select "Connector Settings" , choose "Disable front panel jack detection", and save the change by clicking "OK". 27 ASRock P45XE-WiFiN / P45XE-R / P45XE Motherboard English