ASRock P55 Extreme User Manual - Page 27
Installing Three CrossFireX, Ready Graphics, Cards
View all ASRock P55 Extreme manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.8.1.2 Installing Three CrossFireXTM-Ready Graphics Cards Step 1. Insert Radeon graphics cards into PCIE1, PCIE3 and PCIE4 slots. Make sure that the cards are properly seated on the slots. Step 2. Use one CrossFire Bridge to connect Radeon graphics cards on PCIE1 and PCIE3 slots, and use the other CrossFire Bridge to connect Radeon graphics cards on PCIE3 and PCIE4 slots. (CrossFire Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) CrossFire Bridge Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter.) 27